Logo-bi
Bioimpacts. 2017;7(2): 73-74. doi: 10.15171/bi.2017.09
PMID: 28752070        PMCID: PMC5524987

Editorial

Polymers in our daily life

Hassan Namazi 1,2 *

Cited by CrossRef: 197

1- Bollakayala V, Etakula N, Vuba K, Manne Y, Uttaravalli A. Preparation and characterization of green composites based on expanded polystyrene waste and biomass: Sustainable management approach. Materials Today: Proceedings. 2022;66:1762 [Crossref]
2- Alizadeh M, Pooresmaeil M, Namazi H. A perspective on recent advances in polysaccharide/covalent organic framework composite materials with applications potential in water remediation. International Journal of Biological Macromolecules. 2025;304:140912 [Crossref]
3- Costa T, Sampaio-Marques B, Neves N, Aguilar H, Fraga A. Antimicrobial properties of hindered amine light stabilizers in polymer coating materials and their mechanism of action. Front Bioeng Biotechnol. 2024;12 [Crossref]
4- Ortega Pijeira M, Magne T, da Silva N, Ramos Ribeiro E, Albuquerque Silva Y, Ricci-Junior E, Rebelo Alencar L, Santos-Oliveira R. Ionizing Radiation: Chemical Kinetics, Chemical Bounds, and Radiation Chemistry on Polymers. CTMC. 2023;23(15):1414 [Crossref]
5- Thomas J, Nwosu J, Soucek M. Acid-Cured Norbornylized Seed Oil Epoxides for Sustainable, Recyclable, and Reprocessable Thermosets and Composite Application. ACS Appl Polym Mater. 2023;5(3):2230 [Crossref]
6- Mistry B, Murthy C. Synthesis and properties of ABA type triblock copolymer from poly(dimethylsiloxane) macroinitiator: Development of novel attachable initiators for atom transfer radical polymerization. Journal of Macromolecular Science, Part A. 2022;59(12):786 [Crossref]
7- List D, Gardner A, Claure I, Wong J, Brown K. ASMI: An automated, low-cost indenter for soft matter. HardwareX. 2024;20:e00601 [Crossref]
8- Jambaladinni S, Bhat J. Enhanced Structural, Optical, and Electrical Properties of PVP/ZnO Nanocomposites. Iran J Sci Technol Trans Sci. 2022;46(1):333 [Crossref]
9- Karimi S, Namazi H. A photoluminescent folic acid-derived carbon dot functionalized magnetic dendrimer as a pH-responsive carrier for targeted doxorubicin delivery. New J Chem. 2021;45(14):6397 [Crossref]
10- Somogyi Škoc M, Stevelić N, Rezić I. Development and Characterization of Sustainable Coatings on Cellulose Fabric and Nonwoven for Medical Applications. Sustainability. 2024;16(2):857 [Crossref]
11- Garshasbi H, Soleymani S, Naghib S, Moepubi M. Multi-stimuli-responsive Hydrogels for Therapeutic Systems: An Overview on Emerging Materials, Devices, and Drugs. CPD. 2024;30(26):2027 [Crossref]
12- Devi A, Mitra K, Tiwari S, Srivastava T, Ramakrishna C, Krishna Mohan S, Maiti P. Shelf‐life prediction of silicone‐hollow glass microsphere composite as liner material and its accelerated aging. J of Applied Polymer Sci. 2024;141(32) [Crossref]
13- Menasherov G, Herzallh N, Segal-Peretz T. Atomic Layer Processes for UV-Stable Polymers: Synergistic Effects of Infiltration and Deposition of ZnO. ACS Appl Mater Interfaces. 2025; [Crossref]
14- Muszyński M, Nowicki J, Zygadło M, Dudek G. Comparsion of Catalyst Effectiveness in Different Chemical Depolymerization Methods of Poly(ethylene terephthalate). Molecules. 2023;28(17):6385 [Crossref]
15- Pooresmaeil M, Behzadi Nia S, Namazi H. Green encapsulation of LDH(Zn/Al)-5-Fu with carboxymethyl cellulose biopolymer; new nanovehicle for oral colorectal cancer treatment. International Journal of Biological Macromolecules. 2019;139:994 [Crossref]
16- Kök M, Özen Öner E, Coşkun M, Pekdemir M, Aydoğdu Y. Improving of Insulation PS Materials With Smart PCL and Investigation of Some Physicochemical Properties of Their Blends. J of Applied Polymer Sci. 2025;142(38) [Crossref]
17- Kwon E, Lee J. Polyethylene terephthalate production from a carbon neutral resource. Journal of Cleaner Production. 2024;469:143210 [Crossref]
18- Martolia M, Srivastava S, Singh S, Upadhyaya S, Kumar A. Enhancing Public Awareness: Media Sensitization about Polymers in Daily Life for Sustainable Living. Macromolecular Symposia. 2025;414(1) [Crossref]
19- Yue T, He J, Tao L, Li Y. High-Throughput Screening and Prediction of High Modulus of Resilience Polymers Using Explainable Machine Learning. J Chem Theory Comput. 2023;19(14):4641 [Crossref]
20- Singha Roy S, Sarkar S, Chakraborty D. Determination of Polylactide Microstructure by Homonuclear Decoupled 1H NMR Spectroscopy. The Chemical Record. 2021;21(8):1968 [Crossref]
21- Arslan M. Sulfur-rich polymers from elemental sulfur-derived polysulfide salts and bisepoxides. European Polymer Journal. 2023;194:112131 [Crossref]
22- Tymecka M, Hac-Wydro K, Obloza M, Bonarek P, Kaminski K. The Use of a Barley-Based Well to Define Cationic Betaglucan to Study Mammalian Cell Toxicity Associated with Interactions with Biological Structures. Pharmaceutics. 2023;15(7):2009 [Crossref]
23- Cho S, Yoon B, Lee S, Nam J, Suhr J. Natural Cork Suberin-Originated Ecofriendly Biopolyester Syntactic Foam. ACS Sustainable Chem Eng. 2022;10(23):7508 [Crossref]
24- Ai Y, Liu X, Bai W, Lin Y, Xie R, Jian R. From herbicide to flame retardant: The lamellar-like phosphorus-bridged amitrole toward high fire safety epoxy resin with light smoke and low toxicity. Chemosphere. 2022;291:132704 [Crossref]
25- Nasiri Oskooie M, Pooresmaeil M, Namazi H. Design and synthesis of vinylic glycomonomers and glycopolymer based on α-D-glucofuranose moieties. J Polym Res. 2019;26(12) [Crossref]
26- Gieroba B, Kalisz G, Krysa M, Khalavka M, Przekora A. Application of Vibrational Spectroscopic Techniques in the Study of the Natural Polysaccharides and Their Cross-Linking Process. IJMS. 2023;24(3):2630 [Crossref]
27- Kyatanwar A, Nagarsenker M, Prabhakar B. Biodegradable Polymer-Based Microspheres for Depot Injection-Industry Perception. RADDF. 2023;17(1):13 [Crossref]
28- Pooresmaeil M, Javanbakht S, Behzadi Nia S, Namazi H. Carboxymethyl cellulose/mesoporous magnetic graphene oxide as a safe and sustained ibuprofen delivery bio-system: Synthesis, characterization, and study of drug release kinetic. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2020;594:124662 [Crossref]
29- ZULKIFLI N, ABDULLAH M, MAMAT M. PREPARATION AND CHARACTERIZATION OF MAGNESIUM/ALUMINIUM LAYERED DOUBLE HYDROXIDE AS FILLER IN LOW-DENSITY POLYETHYLENE COMPOSITE. UMT JUR. 2021;3(1):1 [Crossref]
30- Fetouh H, Hefnawy A, Attia A, Ali E. Facile and low-cost green synthesis of eco-friendly chitosan-silver nanocomposite as novel and promising corrosion inhibitor for mild steel in chilled water circuits. Journal of Molecular Liquids. 2020;319:114355 [Crossref]
31- Rede D, Delerue-Matos C, Fernandes V. The Microplastics Iceberg: Filling Gaps in Our Understanding. Polymers. 2023;15(16):3356 [Crossref]
32- Branco L, Saron C. Separation and recycling of polymeric post-industrial waste from adhesive bandages. Int J Environ Sci Technol. 2020;17(4):1877 [Crossref]
33- Hasanin M, Taha N, Abdou A, Emara L. Green decoration of graphene oxide Nano sheets with gelatin and gum Arabic for targeted delivery of doxorubicin. Biotechnology Reports. 2022;34:e00722 [Crossref]
34- Akoğuz H. The experimental investigation of seepage control in different sand soils using photopolymerization. Acta Geophys. 2023;72(2):983 [Crossref]
35- Joseph T, Hasanin M, Unni A, Kar Mahapatra D, Haponiuk J, Thomas S. Macromolecules: Contemporary Futurist Thoughts on Progressive Journey. Eng. 2023;4(1):678 [Crossref]
36- Broda M, Yelle D, Serwańska-Leja K. Biodegradable Polymers in Veterinary Medicine—A Review. Molecules. 2024;29(4):883 [Crossref]
37- Maraveas C, Kyrtopoulos I, Arvanitis K, Bartzanas T. The Aging of Polymers under Electromagnetic Radiation. Polymers. 2024;16(5):689 [Crossref]
38- Pankaew A, Rueangsuwan J, Traiphol R, Traiphol N. Colorimetric detection of poly(methyl methacrylate) using polydiacetylene/zinc(II)/zinc oxide nanocomposites. Journal of Industrial and Engineering Chemistry. 2022;111:519 [Crossref]
39- Soly S, Mistry B, Murthy C. Photo‐mediated metal‐free atom transfer radical polymerization: recent advances in organocatalysts and perfection towards polymer synthesis. Polymer International. 2022;71(2):159 [Crossref]
40- Abutaleb A, ArunPrasanna V. Fabrication of biopolymer nanofibers from natural sources. Textile Research Journal. 2022;92(9-10):1694 [Crossref]
41- Fontecha-Umaña F, Ríos-Castillo A, Ripolles-Avila C, Rodríguez-Jerez J. Antimicrobial Activity and Prevention of Bacterial Biofilm Formation of Silver and Zinc Oxide Nanoparticle-Containing Polyester Surfaces at Various Concentrations for Use. Foods. 2020;9(4):442 [Crossref]
42- Day E, Chittari S, Bogen M, Knight A. Navigating the Expansive Landscapes of Soft Materials: A User Guide for High-Throughput Workflows. ACS Polym Au. 2023;3(6):406 [Crossref]
43- Javanbakht S, Pooresmaeil M, Hashemi H, Namazi H. Carboxymethylcellulose capsulated Cu-based metal-organic framework-drug nanohybrid as a pH-sensitive nanocomposite for ibuprofen oral delivery. International Journal of Biological Macromolecules. 2018;119:588 [Crossref]
44- Spinelli G, Romano V. Special Issue: Thermo-Electric and Mechanical Properties of Carbon-Based Polymer. Materials. 2023;16(19):6472 [Crossref]
45- Hashim H, El-Hiti G, Alotaibi M, Ahmed D, Yousif E. Fabrication of ordered honeycomb porous poly(vinyl chloride) thin film doped with a Schiff base and nickel(II) chloride. Heliyon. 2018;4(8):e00743 [Crossref]
46- Bakker M, Siebert M. Atomistic Details of Methyl Linoleate Pyrolysis: Direct Molecular Dynamics Simulation of Converting Biodiesel to Petroleum Products. Energies. 2024;17(10):2433 [Crossref]
47- Saini T, Meena J, Verma V, Saini S, Malik R. Polyvinyl Alcohol: Recent Advances and Applications in Sustainable Materials. Polymer-Plastics Technology and Materials. 2025;64(6):794 [Crossref]
48- Pooresmaeil M, Namazi H, Salehi R. Simple method for fabrication of metal-organic framework within a carboxymethylcellulose/graphene quantum dots matrix as a carrier for anticancer drug. International Journal of Biological Macromolecules. 2020;164:2301 [Crossref]
49- Yang C, Wang L, Yu Y, Wu P, Wang F, Liu S, Luo X. Highly efficient removal of amoxicillin from water by Mg-Al layered double hydroxide/cellulose nanocomposite beads synthesized through in-situ coprecipitation method. International Journal of Biological Macromolecules. 2020;149:93 [Crossref]
50- Jafari H, Namazi H. κ-carrageenan coated magnetic hydroxypropyl methylcellulose/chitosan nanoparticles as a pH-sensitive nanocarrier for efficient methotrexate release. International Journal of Biological Macromolecules. 2025;322:146750 [Crossref]
51- Afshar A, Gultekinoglu M, Edirisinghe M. Binary polymer systems for biomedical applications. International Materials Reviews. 2023;68(2):184 [Crossref]
52- Namazi H, Nazari N, Javanbakht S, Mahdavi M. Facile in situ synthesis of CuO nanoparticles through the copper-crosslinked carboxymethylcellulose hydrogel bead: a potential implantable anticancer drug delivery system. Polym Bull. 2024;81(12):11299 [Crossref]
53- Tan S, Wu X, Xing Y, Lilak S, Wu M, Zhao J. Enhanced synergetic antibacterial activity by a reduce graphene oxide/Ag nanocomposite through the photothermal effect. Colloids and Surfaces B: Biointerfaces. 2020;185:110616 [Crossref]
54- Kumar S, Gariya N, Shaikh A, Ahmad F, Yadav A. Physico-mechanical and thermal properties of fly ash and benzoylated Himalayan Agave fiber reinforced polyester composite. Biomass Conv Bioref. 2025;15(5):7387 [Crossref]
55- Thomas J, Soucek M. Cationic Copolymers of Norbornylized Seed Oils for Fiber-Reinforced Composite Applications. ACS Omega. 2022;7(38):33949 [Crossref]
56- Machado I, Rachita E, Fuller E, Calado V, Ishida H. Very High-Char-Yielding Elastomers Based on the Copolymers of a Catechol/Furfurylamine Benzoxazine and Polydimethylsiloxane Oligomers. ACS Sustainable Chem Eng. 2021;9(49):16637 [Crossref]
57- Zhuikova Y, Zhuikov V, Khaydapova D, Lunkov A, Bonartseva G, Varlamov V. Evaluation of Chemical and Biological Properties of Biodegradable Composites Based on Poly(3-hydroxybutyrate) and Chitosan. Polymers. 2024;16(8):1124 [Crossref]
58- Karimzadeh Z, Namazi H. Nontoxic double-network polymeric hybrid aerogel functionalized with reduced graphene oxide: Preparation, characterization, and evaluation as drug delivery agent. J Polym Res. 2022;29(2) [Crossref]
59- Djouonkep L, Tamo A, Doench I, Selabi N, Ilunga E, Lenwoue A, Gauthier M, Cheng Z, Osorio-Madrazo A. Synthesis of High Performance Thiophene–Aromatic Polyesters from Bio-Sourced Organic Acids and Polysaccharide-Derived Diol: Characterization and Degradability Studies. Molecules. 2022;27(1):325 [Crossref]
60- Couch J, Marsee J, Callaway W, Ho T, Glorioso K, Mercante M, Williams B, Coughran C, Weiland M, Miller J. Novel DNA-Binding Activity Exhibited by Poly(aspartic acid) Hydrolase-1 Inhibits Poly(aspartic acid) Hydrolase Activity. Biochemistry. 2024;63(15):1901 [Crossref]
61- K, Warkar S. Potential applications and various aspects of polyfunctional macromolecule- carboxymethyl tamarind kernel gum. European Polymer Journal. 2020;140:110042 [Crossref]
62- Uttaravalli A, Dinda S, Bethi B, Praveen B, Gidla B. Use of additives to improve bonding strength of the adhesive prepared from used polymer: Sustainable management approach. Materials Today: Proceedings. 2022;59:120 [Crossref]
63- Saya L, Gautam D, Malik V, Singh W, Hooda S. Natural Polysaccharide Based Graphene Oxide Nanocomposites for Removal of Dyes from Wastewater: A Review. J Chem Eng Data. 2021;66(1):11 [Crossref]
64- Md Dali S, Wong S, Chin K, Ahmad F. The Osteogenic Properties of Calcium Phosphate Cement Doped with Synthetic Materials: A Structured Narrative Review of Preclinical Evidence. IJMS. 2023;24(8):7161 [Crossref]
65- Pooresmaeil M, Namazi H. Fabrication of a smart and biocompatible brush copolymer decorated on magnetic graphene oxide hybrid nanostructure for drug delivery application. European Polymer Journal. 2021;142:110126 [Crossref]
66- Papadakis V, Petousis M, Michailidis N, Spyridaki M, Valsamos I, Argyros A, Gkagkanatsiou K, Moutsopoulou A, Vidakis N. Printability Metrics and Engineering Response of HDPE/Si3N4 Nanocomposites in MEX Additive Manufacturing. Nanomaterials. 2024;14(20):1680 [Crossref]
67- Rawat J, Yadav A, Pramanik N. Self-healing Polymers (SHPs) via Reversible Deactivation Radical Polymerization (RDRP): Synthesis, properties and applications. Polymer. 2024;313:127686 [Crossref]
68- Feisal N, Tengku Ibrahim T, Ahmad M, Cheah W, Kamaludin N. The potential of using microalgae for microplastic degradation in aquatic ecosystem. Algal Research. 2025;85:103825 [Crossref]
69- Karimi S, Namazi H. Magnetic LDH Coated with DOX and CUR Physically Co-loaded onto PEG for Targeted and Controlled Co-delivery of Drugs to Liver Cancer Cells. J Polym Environ. 2025;33(1):269 [Crossref]
70- Yusuf Aliyu A, Adeleke O. Nanofibrous Scaffolds for Diabetic Wound Healing. Pharmaceutics. 2023;15(3):986 [Crossref]
71- Scarano V, Mattiello L, Rocco D. Oligomers Electrosynthesis: A Selective and Greener Synthetic Tool. COC. 2024;28(2):89 [Crossref]
72- Dolmat M, Thomas C, Kozlovskaya V, Kharlampieva E. Multivariate Polymer Laboratory on Synthesis of Alginate Hydrogel Beads and Analysis of Dye Loading and Release. J Chem Educ. 2022;99(9):3289 [Crossref]
73- Javanbakht S, Hemmati A, Namazi H, Heydari A. Carboxymethylcellulose-coated 5-fluorouracil@MOF-5 nano-hybrid as a bio-nanocomposite carrier for the anticancer oral delivery. International Journal of Biological Macromolecules. 2020;155:876 [Crossref]
74- Dou J, Yu S, Reddy O, Zhang Y. Novel ABA block copolymers: preparation, temperature sensitivity, and drug release. RSC Adv. 2023;13(1):129 [Crossref]
75- Ferrari B, Manica M, Giro R, Laino T, Steiner M. Predicting polymerization reactions via transfer learning using chemical language models. npj Comput Mater. 2024;10(1) [Crossref]
76- Alipour Ghorbani N, Namazi H. Polydopamine-graphene/Ag–Pd nanocomposite as sustainable catalyst for reduction of nitrophenol compounds and dyes in environment. Materials Chemistry and Physics. 2019;234:38 [Crossref]
77- Pradhan S, Goswami D, Ratna D, Chattopadhyay S. Graphene nanoplatelet filled elastomer composites; influence of different matrices on the dispersion, electrical and mechanical properties. Polymer Engineering & Sci. 2022;62(11):3880 [Crossref]
78- Alizadeh M, Namazi H. Core-shell structured magnetite carboxymethyl cellulose for cervical cancer treatment by maintaining methotrexate serum concentration. International Journal of Biological Macromolecules. 2025;284:137832 [Crossref]
79- Peixoto C, Soares A, Araújo A, Olsen B, Machado A. Non-isocyanate urethane linkage formation using l-lysine residues as amine sources. Amino Acids. 2019;51(9):1323 [Crossref]
80- Zuo Y, Kwok R, Sun J, Lam J, Tang B. Aggregation‐Induced Emission Macromolecular Materials for Antibacterial Applications. Macromol Rapid Commun. 2023;44(13) [Crossref]
81- Hamedi H, Javanbakht S, Mohammadi R. In-situ synthesis of copper-gallic acid metal–organic framework into the gentamicin-loaded chitosan hydrogel bead: A synergistic enhancement of antibacterial properties. Journal of Industrial and Engineering Chemistry. 2024;133:454 [Crossref]
82- Yahiaoui K, Messaoud Aberkane S, Belala R, Bendjaballah A, Banoun S. Effect of IR Laser Energy on Several Polymers Using LIBS Analysis. Surface & Interface Analysis. 2025;57(1):70 [Crossref]
83- Hodge J, Zamierowski D, Robinson J, Mellott A. Evaluating polymeric biomaterials to improve next generation wound dressing design. Biomater Res. 2022;26(1) [Crossref]
84- Nguyen D, Tao L, Li Y. Integration of Machine Learning and Coarse-Grained Molecular Simulations for Polymer Materials: Physical Understandings and Molecular Design. Front Chem. 2022;9 [Crossref]
85- Lisha V, Kothale R, Sidharth S, Kandasubramanian B. A critical review on employing algae as a feed for polycarbohydrate synthesis. Carbohydrate Polymer Technologies and Applications. 2022;4:100242 [Crossref]
86- Boublia A, Lebouachera S, Haddaoui N, Guezzout Z, Ghriga M, Hasanzadeh M, Benguerba Y, Drouiche N. State-of-the-art review on recent advances in polymer engineering: modeling and optimization through response surface methodology approach. Polym Bull. 2023;80(6):5999 [Crossref]
87- Dinu A, Apetrei C. A Review of Sensors and Biosensors Modified with Conducting Polymers and Molecularly Imprinted Polymers Used in Electrochemical Detection of Amino Acids: Phenylalanine, Tyrosine, and Tryptophan. IJMS. 2022;23(3):1218 [Crossref]
88- Dekanić T, Šaravanja A, Volmajer V, Pušić T. Simulation of accelerated ageing of polyester fabric. Adv Techol. 2023;12(2):19 [Crossref]
89- Kianfar E. Conducting Polymer Nanocomposites for Electronics: Materials, Mechanisms, and Applications. J Inorg Organomet Polym. 2025; [Crossref]
90- Kunchapu S, Jablonka K. PolyMetriX: an ecosystem for digital polymer chemistry. npj Comput Mater. 2025;11(1) [Crossref]
91- Ariati R, Sales F, Souza A, Lima R, Ribeiro J. Polydimethylsiloxane Composites Characterization and Its Applications: A Review. Polymers. 2021;13(23):4258 [Crossref]
92- Nitodas S, Shah R, Das M. Research Advancements in the Mechanical Performance and Functional Properties of Nanocomposites Reinforced with Surface-Modified Carbon Nanotubes: A Review. Applied Sciences. 2025;15(1):374 [Crossref]
93- El-Sawaf A, Abdelgawad A, Nassar A, Elsherbiny D. Immobilization of biosynthesized gallium nanoparticles in Polyvinylpyrrolidone/Sodium alginate films: Potent bactericidal protection against food spoilage bacteria. International Journal of Biological Macromolecules. 2024;274:133438 [Crossref]
94- Nguyen V, Pham L, Nguyen N, Hoang D. Polyvinyl alcohol-based nanocomposite film reinforced with green nanocellulose and silver nanoparticles: structure, properties, and potential applications in food preservation. International Journal of Biological Macromolecules. 2025;318:144988 [Crossref]
95- Pourjavadi A, Asgari S, Hosseini S. Graphene oxide functionalized with oxygen-rich polymers as a pH-sensitive carrier for co-delivery of hydrophobic and hydrophilic drugs. Journal of Drug Delivery Science and Technology. 2020;56:101542 [Crossref]
96- Pooresmaeil M, Namazi H. Preparation and characterization of polyvinyl alcohol/β‐cyclodextrin/GO‐Ag nanocomposite with improved antibacterial and strength properties. Polymers for Advanced Techs. 2019;30(2):447 [Crossref]
97- Trivedi M, Soni H. Marine Microbes as Cell Factories to Produce Biopolymers from Food Waste: A Model of Circular Resource Utilization. Industrial Biotechnology. 2025;21(1):27 [Crossref]
98- Spinelli G, Guarini R, Ivanov E, Calabrese E, Raimondo M, Longo R, Guadagno L, Vertuccio L. Nanoindentation Response of Structural Self-Healing Epoxy Resin: A Hybrid Experimental–Simulation Approach. Polymers. 2024;16(13):1849 [Crossref]
99- Joshi P, Riley P, Gupta S, Narayan R, Narayan J. Advances in laser-assisted conversion of polymeric and graphitic carbon into nanodiamond films. Nanotechnology. 2021;32(43):432001 [Crossref]
100- Munagapati V, Wen H, Wen J, Lin K, Gutha Y, Gollakota A, Yarramuthi V, Rudravarapu K, Sangaraju S, Choi H. Biopolymer-inorganic hybrid composites: The expanding role of cellulose/layered double hydroxides (LDHs) in advanced applications. Inorganic Chemistry Communications. 2025;179:114795 [Crossref]
101- Javanbakht S, Pooresmaeil M, Namazi H. Green one-pot synthesis of carboxymethylcellulose/Zn-based metal-organic framework/graphene oxide bio-nanocomposite as a nanocarrier for drug delivery system. Carbohydrate Polymers. 2019;208:294 [Crossref]
102- Parvez A, Jubyda F, Karmakar J, Jahan A, Akter N, Ayaz M, Kabir T, Akter S, Huq M. Antimicrobial potential of biopolymers against foodborne pathogens: An updated review. Microbial Pathogenesis. 2025;204:107583 [Crossref]
103- Cattò C, Cappitelli F. Testing Anti-Biofilm Polymeric Surfaces: Where to Start?. IJMS. 2019;20(15):3794 [Crossref]
104- Alsaaed F, El-Lateef H, Khalaf M, Mohamed I, Al-Omair M, Gouda M. Drug Delivery System Based on Carboxymethyl Cellulose Containing Metal-Organic Framework and Its Evaluation for Antibacterial Activity. Polymers. 2022;14(18):3815 [Crossref]
105- Behzadi Nia S, Pooresmaeil M, Namazi H. Carboxymethylcellulose/layered double hydroxides bio-nanocomposite hydrogel: A controlled amoxicillin nanocarrier for colonic bacterial infections treatment. International Journal of Biological Macromolecules. 2020;155:1401 [Crossref]
106- Pooresmaeil M, Asl E, Namazi H. Simple fabrication of biocompatible chitosan/graphene oxide microspheres for pH-controlled amoxicillin delivery. European Polymer Journal. 2021;159:110706 [Crossref]
107- Bonta M, Limbeck A. Metal analysis in polymers using tandem LA-ICP-MS/LIBS: eliminating matrix effects using multivariate calibration. J Anal At Spectrom. 2018;33(10):1631 [Crossref]
108- Hung Y, Ho C, Chen L, Ma S, Liu T, Shen Y. Using a Low-Temperature Pyrolysis Device for Polymeric Waste to Implement a Distributed Energy System. Sustainability. 2023;15(2):1580 [Crossref]
109- Dave D, Mestry S, Mhaske S. Development of flame-retardant waterborne polyurethane dispersions (WPUDs) from sulfonated phosphorus-based reactive water-dispersible agents. J Coat Technol Res. 2021;18(4):1037 [Crossref]
110- Spinelli G, Guarini R, Kotsilkova R, Ivanov E, Romano V. Experimental, Theoretical and Simulation Studies on the Thermal Behavior of PLA-Based Nanocomposites Reinforced with Different Carbonaceous Fillers. Nanomaterials. 2021;11(6):1511 [Crossref]
111- Namazi H, Pooresmaeil M, Hasani M. Oxidized starch/CuO bio-nanocomposite hydrogels as an antibacterial and stimuli-responsive agent with potential colon-specific naproxen delivery. International Journal of Polymeric Materials and Polymeric Biomaterials. 2021;70(18):1296 [Crossref]
112- Liao J, Chen Q. Biodegradable plastics in the air and soil environment: Low degradation rate and high microplastics formation. Journal of Hazardous Materials. 2021;418:126329 [Crossref]
113- Panneerselvan L, Raghuraman Rengarajan H, Kandaiah R, Bhagwat-Russell G, Palanisami T. Fibrous foes: First report on insidious microplastic contamination in dietary fiber supplements. Environmental Pollution. 2024;363:125248 [Crossref]
114- Vuba K, Etakula N, Uttaravalli A. Preparation of polypropylene co-polymer (PPCP) based composites with improved properties in presence of MWCNT and MAgPP fillers. Materials Today: Proceedings. 2023;80:1096 [Crossref]
115- Kupczak M, Mielańczyk A, Neugebauer D. The Influence of Polymer Composition on the Hydrolytic and Enzymatic Degradation of Polyesters and Their Block Copolymers with PDMAEMA. Materials. 2021;14(13):3636 [Crossref]
116- Stewart J, Fuchs M, Payne J, Driscoll O, Kociok-Köhn G, Ward B, Herres-Pawlis S, Jones M. Simple Zn(ii) complexes for the production and degradation of polyesters. RSC Adv. 2022;12(3):1416 [Crossref]
117- Fernández-González A, de Lorenzo González C, Rodríguez-Varillas S, Badía-Laíño R. Bioactive silk fibroin hydrogels: Unraveling the potential for biomedical engineering. International Journal of Biological Macromolecules. 2024;278:134834 [Crossref]
118- Arslan M. Elemental sulfur-derived polysulfide salts in synthesis of high sulfur content polymers. Journal of Macromolecular Science, Part A. 2025;:1 [Crossref]
119- Hamedi H, Azizi J, Javanbakht S, Mohammadi R. In-situ Preparation of Highly Efficient Antibacterial Modified Pectin Using Zeolitic Imidazolate Framework. J Polym Environ. 2025;33(2):945 [Crossref]
120- Thomas J, Bouscher R, Nwosu J, Soucek M. Sustainable Thermosets and Composites Based on the Epoxides of Norbornylized Seed Oils and Biomass Fillers. ACS Sustainable Chem Eng. 2022;10(37):12342 [Crossref]
121- Namazi H, Pooresmaeil M, Oskooie M. New glyco-copolymers containing α-D-glucofuranose and α-D-mannofuranose groups synthesized by free-radical polymerization of sugar-based monomers. Polym Bull. 2022;79(7):4891 [Crossref]
122- Zarehzadeh A, Pooresmaeil M, Namazi H. Magnetic carboxymethyl nanocellulose modified with cerium-based metal–organic framework as a new adsorbent for tetracycline removal from aqueous solution. Journal of Industrial and Engineering Chemistry. 2025;148:420 [Crossref]
123- Costa A, Rodrigues J, Pérez-Madrigal M, Dove A, Mano J. Modular Functionalization of Laminarin to Create Value-Added Naturally Derived Macromolecules. J Am Chem Soc. 2020;142(46):19689 [Crossref]
124- Rodríguez-Beltrán R, Prada-Rodrigo J, Crespo A, Ezquerra T, Moreno P, Rebollar E. Physicochemical Modifications on Thin Films of Poly(Ethylene Terephthalate) and Its Nanocomposite with Expanded Graphite Nanostructured by Ultraviolet and Infrared Femtosecond Laser Irradiation. Polymers. 2022;14(23):5243 [Crossref]
125- Wei S, Liu X, Zhou J, Zhang J, Dong A, Huang P, Wang W, Deng L. Dual-crosslinked nanocomposite hydrogels based on quaternized chitosan and clindamycin-loaded hyperbranched nanoparticles for potential antibacterial applications. International Journal of Biological Macromolecules. 2020;155:153 [Crossref]
126- Salas R, Villa R, Velasco F, Cirujano F, Nieto S, Martin N, Garcia-Verdugo E, Dupont J, Lozano P. Ionic liquids in polymer technology. Green Chem. 2025;27(6):1620 [Crossref]
127- Ibrahim M, Shimizu T, Ando H, Ishima Y, Elgarhy O, Sarhan H, Hussein A, Ishida T. Investigation of anti-PEG antibody response to PEG-containing cosmetic products in mice. Journal of Controlled Release. 2023;354:260 [Crossref]
128- Bätz T, Agyemang M, Meurer J, Hniopek J, Zechel S, Schmitt M, Popp J, Hager M, Schubert U. Dual orthogonal metal-complexes and their utilization for the versatile fabrication of smart interpenetrating polymer networks. Polym Chem. 2025;16(4):492 [Crossref]
129- Shakeel A, Mahmood H, Farooq U, Ullah Z, Yasin S, Iqbal T, Chassagne C, Moniruzzaman M. Rheology of Pure Ionic Liquids and Their Complex Fluids: A Review. ACS Sustainable Chem Eng. 2019;7(16):13586 [Crossref]
130- Karimzadeh Z, Javanbakht S, Namazi H. Carboxymethylcellulose/MOF-5/Graphene oxide bio-nanocomposite as antibacterial drug nanocarrier agent. Bioimpacts. 2018;9(1):5 [Crossref]
131- Iqbal Y, Chatha S, Chauhdary Z, Ijaz Hussain A, Khan I. Design and evaluation of moringa gum-based hydrogel dressings for cutaneous wound healing. Journal of Bioactive and Compatible Polymers. 2023;38(6):417 [Crossref]
132- N B, S Y, P P, C.P Y. Influence of non-thermal plasma treated Nano-carbon on TiO2 coated PMMA for bio activation of medical devices. Front Adv Mater Res. 2025;:86 [Crossref]
133- Zhong X, Nag A, Zhou J, Takada K, Kusano M, Kaneko T. Pin-point Surgery of Proton-deuterium Substitution to Enhance Polybenzimidazole Thermoresistances. 2023;52(10):819 [Crossref]
134- Dilmaghani S, Namazi H. In-situ Preparation of Zeolitic Imidazolate Framework-8 Modified Dialdehyde Starch-Crosslinked Chitosan Hydrogel Films as an Antibacterial Bio-platform for pH-sensitive Doxorubicin Delivery. J Polym Environ. 2025; [Crossref]
135- Organski L, Wang X, Myers A, Chen Y, Park K, Horava S, Richard C, Yeo Y, Shashurin A. Inner surface modification of polyethylene tubing induced by dielectric barrier discharge plasma. 2022;40(6) [Crossref]
136- Yadav R, Singh M, Shekhawat D, Lee S, Park S. The role of fillers to enhance the mechanical, thermal, and wear characteristics of polymer composite materials: A review. Composites Part A: Applied Science and Manufacturing. 2023;175:107775 [Crossref]
137- Lee J, Park C, Fai Tsang Y, Andrew Lin K. Towards Sustainable Production of Polybutylene Adipate Terephthalate: Non‐Biological Catalytic Syntheses of Biomass‐Derived Constituents. ChemSusChem. 2024;17(23) [Crossref]
138- Edo G, Ndudi W, Ali A, Yousif E, Zainulabdeen K, Akpoghelie P, Isoje E, Igbuku U, Opiti R, Athan Essaghah A, Ahmed D, Umar H, Alamiery A. Chitosan: An overview of its properties, solubility, functional technologies, food and health applications. Carbohydrate Research. 2025;550:109409 [Crossref]
139- Tang L, Alias Y, Zakaria R, Woi P. Progress in Electrochemical Sensing of Heavy Metals Based on Amino Acids and Its Composites. Critical Reviews in Analytical Chemistry. 2023;53(4):869 [Crossref]
140- Gill A, Sood M, Deol P, Kaur I. Synthetic polymer based electrospun scaffolds for wound healing applications. Journal of Drug Delivery Science and Technology. 2023;89:105054 [Crossref]
141- van Boxel J, Nijmeijer S, Heinzelmann M, Rupp S, van Duursen M. Limited passage and functional effects of polystyrene micro- and nanoplastics in a physiologically-relevant in vitro human placental co-culture model. Reproductive Toxicology. 2025;136:108956 [Crossref]
142- da Silva C, Ferreira N, Santos A, Schön C. Double edge notched tensile testing of PET/ PA blends. Procedia Structural Integrity. 2025;68:1252 [Crossref]
143- Ghaffari A, Pooresmaeil M, Namazi H, Entezami A. New polymer systems based on polyethylene glycol: synthesis, characterization, and study of the solubility behavior. Polym Bull. 2020;77(11):5663 [Crossref]
144- Wang X, Su T, Zhao J, Wu Z, Wang D, Zhang W, Wu Q, Chen Y. Fabrication of polysaccharides-based hydrogel films for transdermal sustained delivery of Ibuprofen. Cellulose. 2020;27(17):10277 [Crossref]
145- Nugraha A, Naindraputra A, Gaol C, Ismojo I, Chalid M. Polypropylene-based Multilayer Plastic Waste Utilization on Bitumen Modification for Hot-Mixed Asphalt Application: Preliminary Study. J Appl Sci Eng Technol Educ. 2022;4(2):157 [Crossref]
146- Thorbole A, Bodhak C, Sahu P, Gupta R. Green ink revolution: Pioneering eco‐friendly 3D printing with vegetable oil‐derived inks. Polymer Engineering & Sci. 2024;64(12):5879 [Crossref]
147- Spinelli G, Guarini R, Kotsilkova R, Batakliev T, Ivanov E, Romano V. Experimental and Simulation Studies of Temperature Effect on Thermophysical Properties of Graphene-Based Polylactic Acid. Materials. 2022;15(3):986 [Crossref]
148- Elghnam S, Abdelalim Y, Hamad M. Important modifications in dielectric properties of LDPE after contact with some foods. Journal of Taibah University for Science. 2022;16(1):1048 [Crossref]
149- Weerasinghe M, Nwoko T, Konkolewicz D. Polymers and light: a love–hate relationship. Chem Sci. 2025;16(13):5326 [Crossref]
150- Nash R, Joyce H, Pagter E, Frias J, Guinan J, Healy L, Kavanagh F, Deegan M, O’Sullivan D. Deep Sea Microplastic Pollution Extends Out to Sediments in the Northeast Atlantic Ocean Margins. Environ Sci Technol. 2023;57(1):201 [Crossref]
151- Pooresmaeil M, Namazi H. Chitosan coated Fe3O4@Cd-MOF microspheres as an effective adsorbent for the removal of the amoxicillin from aqueous solution. International Journal of Biological Macromolecules. 2021;191:108 [Crossref]
152- V. K. A, Udduttula A, Jaiswal A. Unveiling the secrets of marine—derived fucoidan for bone tissue engineering—A review. Front Bioeng Biotechnol. 2023;10 [Crossref]
153- Siegu W, Djouonkep L, Selabi N, Bonku E, Cheng Z, Gauthier M. Synergistic Effect and Structure–Property of Bio-based 1,6-Hexanediol on Thermal, Mechanical and Degradation Properties of Biopolymers. J Polym Environ. 2023;31(3):1144 [Crossref]
154- Mohanty P, Kumari N, Kerry R, Ray A, Bhol N, Panigrahi B, Majhi S, Rath P, Nayak S, Badamali S. Ecofriendly Fabrication and Hierarchical Exploration of Cytocompatible Lignin Nanoparticles for Biomedical Applications. ACS Appl Bio Mater. 2025;8(11):9709 [Crossref]
155- Awad M, Dhib R, Duever T. Atom transfer radical polymerization initiated by activator generated by electron transfer in emulsion media: a review of recent advances and challenges from an engineering perspective. Journal of Dispersion Science and Technology. 2023;44(8):1433 [Crossref]
156- Hazhir N, Chekin F, Raoof J, Fathi S. A porous reduced graphene oxide/chitosan-based nanocarrier as a delivery system of doxorubicin. RSC Adv. 2019;9(53):30729 [Crossref]
157- Arslan M, Akdeniz Ş, Erdemi H. Polysulfide-ene polymerization of bisacrylamides and bismaleimides toward sulphur-rich polymers. Journal of Macromolecular Science, Part A. 2024;61(5):339 [Crossref]
158- Javanbakht S, Nazari N, Rakhshaei R, Namazi H. Cu-crosslinked carboxymethylcellulose/naproxen/graphene quantum dot nanocomposite hydrogel beads for naproxen oral delivery. Carbohydrate Polymers. 2018;195:453 [Crossref]
159- Šaravanja A, Pušić T, Dekanić T. Microplastics in Wastewater by Washing Polyester Fabrics. Materials. 2022;15(7):2683 [Crossref]
160- Schick S, Heindel J, Groten R, Seide G. Overcoming Challenges in the Commercialization of Biopolymers: From Research to Applications—A Review. Polymers. 2024;16(24):3498 [Crossref]
161- Bakravi A, Ahamadian Y, Hashemi H, Namazi H. Synthesis of gelatin‐based biodegradable hydrogel nanocomposite and their application as drug delivery agent. Adv Polym Technol. 2018;37(7):2625 [Crossref]
162- Barbosa-Nuñez J, Espinosa-Andrews H, Cardona A, Haro-González J. Polymer-based encapsulation in food products: a comprehensive review of applications and advancements. Journal of Future Foods. 2025;5(1):36 [Crossref]
163- Mehra A, Tharmatt A, Saini N, Singh G, Kaur K, Singh G, Bedi N. In Situ Hydrogels for Effective Treatment of Cancer: Strategies and Polymers Used. RADDF. 2022;16(4):287 [Crossref]
164- Pradhan M, Patnaik A, Banerjee M, Mishra S. Effect of micro‐sized blast furnace slag on physical, mechanical, and thermo‐mechanical properties of bi‐directional date palm fiber reinforced polymer composite. Materialwissenschaft Werkst. 2025;56(2):266 [Crossref]
165- G, Kumar S, Kumar S, Kumar S, Saini M, Dubey S. Phosphorylation of chitin and chitosan: A review on its significance and various synthesis routes. Polymers from Renewable Resources. 2024;15(2):278 [Crossref]
166- Nugraha A, Gaol C, Chalid M, Akbar G, Aqoma H. Enhancing the compatibility of low-value multilayer plastic waste in bitumen mixtures using atmospheric cold plasma and thermal oxidation. Advanced Manufacturing: Polymer & Composites Science. 2024;10(1) [Crossref]

As a peer-reviewed international open-access journal, BioImpacts publishes articles on basic and translational aspects of pharmaceutical and biomedical sciences. 
Acceptance rate (2024): 20% 
Publication fee: Free of charge

Indexing/Abstracting Info
PubMed; PubMed Central; Scopus; Science Citation Index Expanded; Google Scholar;   SJR; Essential Science Indicators; Embase; EBSCOhost; CAS: DOAJ: SHERPA/RoMEO
Member of   
Follower of ICMJE
Permission: Creative Commons